Our product is low VOC, environmentally friendly, industrial strength, high grade, two part epoxy

We apply multiple coats, with a turbine drive spray gun

We meticulously clean all surfaces to be refinished in order to remove grime, body oils and soap scum.

Repairs that were previously discussed will be completed prior to refinishing.

Before we arrive

Remove all towels and linens, clear nearby countertops so that we can mask off,remove shower curtains, soaps and shampoos

Remove sliding type shower doors (they usually lift out)

We will be using a ventilation sock and fan to exhaust dust and fumes through the nearest window or door. (fumes will dissipate hourly and be mostly gone the next day)

Upon arrival

We require electricity, running water and working drains. Note: We cannot not work on a tub that has leaking faucets.

The indoor temperature must be kept at 68–76 degrees in order for the epoxy to set up properly

Once the refinishing is complete

The refinished unit needs to be undisturbed for 24 hours from the time we finish spraying. This is essential to the curing process.

After 24 hours, the plastic bags that we have placed over spouts can be removed carefully, and the tub or shower may be used for bathing or showering. Please be gentle with the unit and do not use anything with dyes in it, as It will be in a curing process for 14 and 21 days.

Do not use suction cup bath mats, it will void the warranty

Damage caused by other tradesmen will be considered a chargeable repair

Do not use abrasive cleaners, hair dyes or bath bombs.

For your tubs’ maintenance, we recommend a mild liquid soap be used with a sponge or microfiber cloth.